Welcome to Queenway store!
About the products details, we carefully tell you: these specifics produced by AliExpress system, some of these aren’t fully correct, even it is wrong. So the correct products information is derived from the detailed description. Usually the description has a few pictures and introduction. If you are in 110V area, please tell us. About the international shipping/transportation cost, it isn’t accuracy on some countries, if it is expensive, please contact us! Sometimes we can find a cheap way, we must 100% reply to you! Please carefully check the packing/box/parcel when the your receiving the parcel.
Amari Vinyl record player LP-18s magnetic suspension PHONO Turntable with tone arm Cartridge phono record town disc stabilizer
Vinyl record player Parameters
Drive form : single AC motor drive
Driver system : belt driver
Dimensions : 460mm * 360mm * 200mm( Length * Width * Height )
Turntable : CNC precision machining of aluminum alloy material
Head Shell : CNC precision machined aluminum plate + phenolic resin panel
Color : aluminum, very fine silk, aluminum alloy
Foot : magnetic support mechanism adjustable aluminum alloy machine feet
Turntable speed : 33 1/3, 45 speed electronic touch switching, speed can be fine-tuned
Tone arm seat : VTA adjustable Phono arm
Tone arm : 9.0-3
Cartridge : Japanese original iron triangle MM cartridge
Speed governor : built-in AC motor dedicated governor
Speed monitoring : grs5 digital high precision real-time speed detection system
Motor : imported high precision AC synchronous motor
Audio output
RCA terminal : YES
Ground terminal : YES
Phono output level : 3MV
Phono/LINE selection switch : YES
33 1/3 45RPM Micro governor : YES
AC power adaptor : YES
Power Distortion : 3 W
Cartridge Parameters
Model : Audio-technica AT95E
Frequency response : MM cartridge
Output voltage : 3.5mV (1kHz , 5cm/sec.)
Channel distortion : 20dB (1kHz )
Output balance : 2.0dB (1kHz )
Stylus Pressure : 1.5-2.5g ( recommend 2.0g )
Coil impedance : 2800 ohms (1kHz )
Coil DC resistance : 410 ohms
Load resistance : 47000 ohms ( Recommended )
Load capacitor : 100-200 pF
Coil inductance : 400mH (1kHz )
Static obedience : 20*10-6 cm /dyne
Dynastic obedience : 6.5*10-10 cm /dyne
Stylus type : Joint ellipse ( 0.4*0.7 mil )
Needle bar : Aluminum alloy rod
Vertical tracking foot : 20
Dimension : 17.2*17*30.5 ( H*W*D )
Cartridge Weight : 5.7g

Features
1. Magnetic suspension bearing system
2. Adopts European imported motor
3. Standard MM, MC PHONO
Pure and sweet sound
LP18s , With imported magnetic Cartridge , medium frequency wet and wide, low frequency full and elastic, high frequency bright and dry
Enjoy simulation sound technology
Independent titanium metal tone arm . The posture is more stable, and the resonant frequency of the lightweight arm makes the sound quality clearer and more realistic .
Aluminum alloy Stylus Pressure turntable
The weight of the metal turntable not only provides an excellent balance between strength and texture, but also makes the rotation speed more stable and shockproof.
Magnetic suspension bearing system
The skeleton oil seal bottom of the lower sleeve, and the rotating shaft adopts zirconia ceramic, which is smooth, hard and wear-resistant.
60mm Birch fuselage
Inlaid with 4mm hot-rolled steel plate, it reduces the center of gravity of the disc and absorbs vibration.
Built-in phono equalizer
MM and MC phono amplifiers for easy commissioning and installation