433Mhz Universal Wireless Remote Control Switch AC 85V – 250V 1CH relay Receiver Module with RF Remote 433 Mhz Transmitter with 2-button Intelligent Learning code 1527
-1)Package Included:
1 * Remote Control (include battery )
-2)Package Included:
1 * Receiver module (KR2201-4 ) ( include Shell )
The package Included different products because you choose a different package
-Wiring diagram
-Instruction
About Working mode:
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Push once the remote button, the relay connects , push twice the remote button , the relay dis-connects .
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
How to use the demo video:
The demo version of the video is an old version of the receiver,
the receiver of the new version of the button with its different position,
but they are used in the same way.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code: (momentary)
Press the learning key(on the Receiver) once time, the LED (on the Receiver)will blink one time. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.
Learning the code: ( Toggle )
Press the learning key(on the Receiver) 2 times, the LED (on the Receiver)will blink 2 times. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.
Learning the code: ( Latching )
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learnt is for “ON”, the second time learnt for “OFF”.
For example: button A = ON, button B = OFF
Press the learning key(on the Receiver) 3 times, the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON, B = OFF .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the receiver will stop working or not working properly.
-Specification of Receiver
Input Power: AC 85V – 250V
Standby Current: <5MA
RF Frequency: 433M
RF working mode: superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20-50m ( open space)
Decoding mode: MCU software decoding
Remote storage: 20pcs
Support remote type: Learning code 1527Code
Working mode: Momentary, Toggle
Dimension of PCB: 53.8*31.2mm